Nushar: Proseal–TC

Transparent Waterproofing chemical

Overview

Proseal–TC, protective sealant transparent water proofing chemical coat. PTC is weather proof sealant chemical. PTC is light milky liquid, which turns transparent after curing. PTC enters into fine pores of surface and seals them. It makes a thin transparent film with 3 coats and protects the surface from weather attacks.

Specifications

Colour/Appearance        : Translucent White

Type                                      : Liquid

Density                                 : 0.94 gm/cc

Surface Drying Time        : 20 Min (25oC)  

Over Coat Time                 : 30 Min (25oC)

Completed Cure               : 24 hours (25oC)

Coverage                             : 40-60 sq. ft per lit.

Properties                           : Water Proof, Acid Rain Proof, Anti Bacterial Coat

Where to use

All types of sandstones, slates, brick work, concrete,Wood, marble, granites, lime stones, cast stones etc. Can be applied on backside of stones before laying on floor to avoid seepage spots.

Features

  • 100% water proofing transparent chemical coat.                                      
  • No change in appearance of the original surface.
  • Protects and increases the life of the treated surface.
  • High penetration due to low surface tension.
  • Air drying and single component material.
  • Anti fungal and eco-friendly (aqua base).
  • Gives a glossy film on the surface.

Applications

  • Clean thoroughly with water to remove dust/soil and any other loose particle from the surface
  • Wipe out the water before application
  • Wait for surface to dry
  • Apply 2 to 3 coats with brush or spray uniformly (wait for at least 30 min. after each coat)
  • Surface is ready to use after few hours

 

Packaging Available: 1 ltr, 5 ltr